Take Care of The Relationship Between the Print Head And Your Sublimation Ink

  Hi, Nice to see you. In the sublimation printing process,  three important factors are necessary: sublimation paper, sublimation ink and sublimation printer. Then do you know the relationship between them and what should you take care when you operate the printing? Today, I will firstly introduce you the relationship between the sublimation printer and ink. 

  For the sublimation printer, the most important one is the print head. So the relationship between the printer and ink is just the relation of the ink and print head.  If you can't protect your print head in a right way, your print head will be damaged or blocked. In factors that cause the print head block, the ink is also a important reason. Then today I will share you some small tips about how to solve the common problems of the print head from the side of sublimation ink. Read the following and get to know more.

Factor 1  the ink viscosity is too high
   If the ink viscosity is too high will cause the ink  tube adhesion, resulting in insufficient ink supply. The ink volume will be not enough and also cause the color fault. Especially in the winter, the temperature is low, this phenomenon is more prominent.
Solution: To improve the indoor temperature (such as air conditioning, with a dryer, electric heaters, etc.), so that ink viscosity. Or use a more viscous ink.

Factor 2 The Pressure on The Nozzle
  The voltage of the nozzle, because the level of the nozzle can determine the level of the internal pressure of the piezoelectric ceramic bending, and thus high voltage can also increase the amount of inkjet. Does not affect the quality of the picture under the premise of the lower the better. 
Different Situation
  A. The nozzle voltage is high and the ink viscosity is low, it will cause too much inkjet, the speed is too fast, the ink point reflects the bottom of the nozzle to form ink droplets plug the nozzle, there will be burr and floating phenomenon.
 B. If the nozzle voltage is low and the ink viscosity is high, there will be no ink spray, color block is not uniform, not full and so on.
Solution: Replace the appropriate ink or lower the voltage

Factor 3 Ink Viscosity is Too Low
  If the ink viscosity is too low, the ink is too thin, inkjet speed, ink sprayed on the light cloth will be reflected back to the nozzle, causing the ink stagnation in the nozzle, causing nozzle clogging. Long time spray the same color. This phenomenon is more prominent.
Solution: Spray the nozzle with a professional swab sticky cleaning solution. If you want to completely solve this question will have to change the viscosity of high ink.

Factor 4 The Impact of Static Electricity on Equipment And Ink
  In the inkjet process due to the inkjet substrate and the roller friction produced a lot of static electricity, if not promptly ruled out, can easily affect the normal operation of the nozzle, such as ink droplets enough to be affected by static and deviate from the trajectory of the screen And if the static electricity is too large may also damage the nozzle, and the computer equipment under the influence of high static electricity prone to garbled and crash phenomenon, or even burn the machine circuit board phenomenon
Solution:Take the correct and effective measures to exclude equipment Of the static is extremely important. Buried ground is a good way to eliminate static electricity.

  Okay, These all above are my share about some important factors that may damage the print head of the digital inkjet printer from the side of sublimation ink. If you have any needs or questions welcome to contact us at any time. We will provide you with the best quality product and service. Hope my article can be useful to you. Thank you for your reading.

Whatsapp:+8618752006819

www.heatsub.com

Facebook: zeo(章江徽） 

Email:zeo@feiyuepaper.

Do You Know What's The Best Environment for Your Sublimation Ink Storage ?

  Hi, Nice to see you. How are you today. The sun shines very well today. Last Friday I have shared you the characteristic of our J-teck sublimation ink. With it's special feature and many advantages, are you attracted to it? Well, you should know complete a good printing effect you not only need to make your sublimation ink has a high quality when buy it, you also need to store it in a right way. Or your ink will be degenerated if you can't save it in a right way. Then today I will share you some right ways for you to store your sublimation ink. Read the following article and hope it can be useful to you.

Temperature
Tip 1 
  The storehouse is better keep a constant temperature, which is almost the same with printing shop’s. You should put the ink in the printing shop in advance if there is a big temperature difference between the two. Thus not only conducive to the stability of the ink performance, also ensure the production efficiency. 
Tip 2 
  In some cold areas, you should avoid storing the ink outdoors, to prevent the ink at a low temperature occurs cementations. If the ink occurs cementations, you can move it to the high temperature of the warehouse or put it in hot water to make it restore. 

Environment
Tip 1 
  Ink should be away from the fire and heat source, to prevent the occurrence of accidents.  
Tip 2 
   The remaining ink must be sealed and stored in the shadows. It must be filtered with more than 100 mesh screen, fully stirred, and then mixed with new ink. 

Usage
Tip 1
  Use it quickly. Long time storage will affect its use. Normally, the ink should be used during one year once it was open. 
Tip 2
  Avoid dust. If your sublimation ink has been opened already, you should better use it all and don't leave it with opened. 

  Okay, These all above are my share about how to store your sublimation ink from three different sides. If you have any other needs or questions welcome to contact us at any time. We will provide you with the best quality product and service. Hope my article can be useful to you. Thank you for your reading.




Whatsapp:+8618752006819
www.heatsub.com
Facebook: zeo(章江徽） 
Email:zeo@feiyuepaper.

Characteristic of J-teck Sublimation Ink-----How Much Do You Know about It?

  Hi, Nice to see you. Friday is coming again. Today's share and topic is about the sublimation ink. In the sublimation printing and transferring process, the sublimation ink is very important. The printing and transferring is just make the colors you want onto the other surfaces,such as the paper and the fabric. Then the sublimation ink is the premise of the color. Then today I will share you some  special characteristic and and advantages of the famous high quality ink-----J-teck sublimation ink.

  The brand of J-teck sublimation ink is come from Italy. It has high quality and technology in this ink. The reputation of this ink is same as the KIIAN sublimation ink. Also in my last articles I have introduced you the specific different models of the J-teck. Apart from the variety models this sublimation ink also has many other characteristics. So in order to let you have a much more understanding of this ink, in the next words I will share you more about it.

  Firstly, the J-teck sublimation ink is a water based ink. It's water-based can reach to 30% reduced viscosity. With this it can dries fast on any coated paper with less deflection. Then it  has less deflection allowing for greater printing accuracy. Not only the ink has it's characteristic, all packaging material is biodegradable or made from recycled materials.

  Secondly, introduce from the printing side. J-Teck sublimation inks are dispersed dyes within an eco-friendly liquid carrier that are printed onto paper.The dispersed dyes are transferred from the paper to a textile creating a vibrant image. The formula of this J-teck sublimation ink make it possible for the dyes to run through high speed print heads without clogging. Sublimation inks have a wide variety of applications, from sports-wear to plastic substrates. What's more, with so many different special series, especially for J-Teck J-NEXT series and J-CUBE series, these two series are mainly suitable for different print heads.

  Last, information share from the side of application. The J-teck sublimation ink can be used in the polyester & polyamid fabrics, mixed synthetic fabrics (min. 60% of synthetic fibres). In the popular speaking, you can use it for the color print and transfer of the hard materials such as the plastic substrates used in the manufacturing of sport equipment such as skis, snowboards, wake boards, every substrates (wood, glass, ceramics) overprinted with polyester-based coating, also the light polyester fabric, such as poly/lycra, chiffon, satin, mesh fabric, curtain fabric etc.

  Okay, These all above are my share and introduce about the characteristic of the Italy J-teck sublimation ink. If you have any needs or questions welcome to contact us at any time. We will provide you with the best quality product and service. Hope my article can be useful to you. Thank you for your reading.




Whatsapp:+8618752006819
www.heatsub.com
Facebook: zeo(章江徽） 
Email:zeo@feiyuepaper.